Xylem (ITT Laing Thermotech) Watkins Hot Spring Spas E-5 Circulation Pump 3/4" Barb

Replacement Xylem Laing Thermotech E-5 spa circulation pump used on Watkins Hot Spring Spas

100-240v, 50/60Hz
40w
IP44
6080C5031
E5-NCHNNNN3W-10

Supplied with lead with bare ends

Replaces older SM303

Warranty covers manufacturing defects for a period of 12 months from date of sale when used with fresh water spa applications only.

This pump is NOT to be used in salt water applications including marine or mineral salts. 
Ensure the pump is installed horizontally, or vertical with wetend up - do not install on angles with wetend dipping downward. 

Ensure on installation, and after each refill of the spa, that the circulation pump is primed and correct water flow is observed. 
An airlocked pump will fail due to dry running which is not covered by warranty and may result in a new pump being required. 

NB - when replacing older SM303 pumps with red motors (some with black also), if fitted with an inline strainer before the pump - please REMOVE this strainer. It is not required with an E-5 pump and if left fitted, can cause starvation of the pump if the strainer clogs. This may cause premature failure from dry running.