Spa Bath Suction Fittings

Spa bath (bathroom baths with spa jetting) safety suction fittings

note that most listed are either very low flow rated or not flow rated at all - they are NOT allowable for use as a spa pool or swimming pool suction unless flow rated correctly
Installation compliance with AS3861-1991 4.1.2 is also required. Suctions must be positioned to prevent entrapment and 50% of total surface area of covers must not be able to be covered by one hand



S&P Supa Suction - 40mm Slip - White 192 lpm rated

SKU: wcasf523

S&P Supa Suction - White with 40mm slip fit. With a low rating for flow of 192 litres per minute, it is likely you will need at least 2 of these to suit your pumps flow rate. 85 x 100mm faceplate OD, 4...

6 In Stock

login or register to view pricing

Login/Register

S&P Supa Suction - 40mm thread - White 168 lpm rated

SKU: wcasf480

S&P Supa Suction - White - 40mm BSP thread (47mm OD thread) 85mm x 100mm OD faceplate diameter, cover screws are 50mm apart Threads into 40mm BSP faucet adaptor or elbow fittings, or any other female 40m...

38 In Stock

login or register to view pricing

Login/Register

Spa Bath Suction Cover Warning Label / Decal

SKU: e11050

Spa bath suction fitting warning label decal - marked with mandatory safety information Oval shape 84mm wide x 52mm high Stick either on the suction fitting or bath adjacent to the suction fitting...

10 In Stock

login or register to view pricing

Login/Register

Waterway Designer Series Bath Suction Assembly - Chrome

SKU: ww643-4460-pc-kit

Waterway designer series chrome spa bath suction - low profile. Rated at 454 lpm with vacuum break installed, Rated at 356 lpm without vacuum break installed (capped off) NB at least 2 of these fitting...

1 In Stock

login or register to view pricing

Login/Register