Spaquip 3.0kw Spa Power 601 Controller WITH Timeclock & Touchpad - 15A

NOTE - If you have a 2 speed pump, the only blower that can be used is a Davey Q5602 variable speed blower which are discontinued. No other blower can be used when this pack is set to operate a 2 speed pump.
It's not possible to run a single speed pump with this pack fitted with a 3kw heater

This 3.0kw version Spaquip Spa Power 601 Operates:
1 x 2spd pump (single speed can only be used with a circulation pump)
1 x variable speed blower (if Auxillary not used)
Circulation pump
Ozone
LED Light

Front panel mounted timeclock - the timeclock function is primarily for use as a 'Sleep' mode to prevent noisy operating in the early hours. It can also be used to prevent heating when electricity costs may be higher.

Single speed pump restriction without circulation pump - CANNOT BE USED WITH THIS 3.0kw VERSION - if you have a single speed pump rated under 2hp you may be able to use the 2.0kw version, otherwise will likely require a spa pack rated at a minimum of 20A hard wired.
Two speed pumps of any capacity up to 3hp / 2200w are fine on this system.
230v, 50Hz, 15A, 3.0kw heater Supplied with 15A power cord/plug 2 year pack warranty

Programming must be set PRIOR to connection any 2 speed pump.