Major Tech MTi3 160 x 120 Pixel Thermal Imager for Spa Service Technicians

Major Tech MTi3 160 x 120 pixel thermal imager for spa service technicians

Thermal imagers can be used by spa technicians to easily locate electrical equipment hot spots such as dry motor bearings, poor electrical terminations, and potentially locate water leaks*

2.8" LCD, 320 x 240 pixels (not touch screen)
IR resolution 160 x 120 pixels 

Modes:
IR image 
Visual image 
Picture in picture 
Auto Fusion 
-20c to 150c temperature and 0c to 550c ranges 

Transmit data via bluetooth to smart phone App. 

This meter is NOT IP rated - it cannot get wet 

Additional features include:
Built in rechargeable Lithium Ion battery - 4hr operating time 
Bluetooth and wifi 
2m drop tested 
 

Includes:
Soft carry case, USB charger/transfer cord, 32GB SD card 

Ensure your safety when working in and around spas. 

Warning - to be used by competent persons only. 
Never solely rely on test devices and ensure you have adequate knowledge on the testing and use of this tool. 

2 year warranty

* Leak location finding with this thermal imager is possible when the spa water temperature is significantly different to air temperature under the spa. Water leaking through a joint at the spa shell or pipe connection should be at a lower temp than the body of water, but higher than air temp allowing the thermal imager to pinpoint to source of a leak saving time digging through foam visually looking for the leak.