Balboa X-P332 Expander Board - Fused - 2 relay

Balboa expander board X-P332

SC-30 fuse, 2 x relay output, single 4 pin socket
Control wire has 3 wires/pins

For connection of various outputs determined by specific Balboa spa packs fitted with this board from the factory.
Outputs that connect include :
2 speed pump
2 x single speed pumps*
1 x single speed pump plus 1 x air blower*
*with additionally required AMP splitter cable.

NB This is a replacement spare part - it cannot be fitted to an existing circuit board that does not have compatible programming.
it is not supplied with mounting components - re-use original.

Used on some current BP series controllers, GS523DZ, and numerous older systems as well.

Note that this Expander board can also be used to replace any single relay/output Expander board used on a Balboa circuit board.
Red and orange wires/pins are used on the 2 pin EXT RLY (external relay) connector on the main pcb - see 2nd image
Can be used in this way with GS, GL or other Balboa series pcb's.
Can be used to replace artesian33-0642-08 & b55857 expander pcb's.