Balboa BP200G2 Spa Control Pack - 2kw

Balboa BP200G2 spa pack complete with in line 2.0kw heater

Suits 
1 x jet pump - 2spd pump with/without circ pump or 1 spd pump  with circ pump, 
1 x blower or jet pump 2, 
ozone, 
light. 
2kw heater 

BWA wifi module/smartphone compatible with separately purchased BWA module.
Use in conjunction with existing or new (separately supplied) TP series topside panels including:
TP400, 
TP600, 
TP800 colour touchpad, 
SpaTouch2 colour touchscreen touchpad. 

This pack with 2kw heater may be suitable for some 10A applications. Normally 15A minimum required. 
10A applications depend on pump configuration and current draw, and 2nd output limited to a blower or unused.

Replacement pack (with separately sold touchpad) for older: 
GS501, GS502 systems - same plumbing and wiring connections 

DIMENSIONS:
205mm high x 380mm wide flange to flange. 
160mm total depth. 90mm depth from the front of the pack to the tube/pipe - *this may be an issue if space is restrictive.

***IMPORTANT - there are multiple variations of BP200 spa packs and they are not necessarily cross compatible. Ensure you are purchasing the exact/compatible spa pack. Model variations include: BP200G1 (2 spd pump or 1 spd with circ ONLY), BP200G2 )2 spd pump or 1 spd pump with circ AND pump 2 or blower), BP200G3 (2 spd pump or 1 spd pump with circ, AND Blower ONLY - does not support 2nd pump instead of blower), and each are available with 2kw or 3kw heaters.
Programming must be set PRIOR to connection any 2 speed pump.